Wednesday, November 30, 2011

AG #10 - Standard Stout II - Brew day

Lots of Chocolate Malt &
Roasted Barley in the
grain bill.
So finally after 5 months of a brewing hiatus I got to brew a beer last weekend. I decided on a version of my Standard Stout recipe that I had brewed previously and that I was really happy with. This time round I gave it more of an American Stout twist by adding some late addition hops. Here is the full recipe.

Brew day took a little while to get going as I started to work out how to brew in my new surroundings. Eventually decided to take over the shed for the day and set everything up in there. This worked out quite well and I ran a water hose and extension cable from the outside water and electricity points at the back of the house. I was a little worried that the single outside electricity point would not be able to handle a 60 minute boil with two x 2 kw elements on the go, however all went well and resetting of trip switches was not required.

I have not yet become fully accustomed to my new surroundings and so there was a little reorganization of brewing vessels as the day went on, however I have learned from this and will have a proper three tier set up for my next brew.

Wort aeration system in action.
The brewing went very well with no particular issues. However I did introduce one new technique into my brew day that I have to say gave great results. A couple of months ago I ordered a few brewing gadgets from the US, one was a refractometer, the other a wort aeration system. The wort aeration system comprises of an air pump, filter and aeration stone. Basically the air is generated by the air pump, passes through the filter, down a tube and through an aeration stone that you submerge in the wort for 10-20 minutes before attaching your blow-off tube. This seemed to work very well as about 8 hours later the wort was fermenting away and continued solidly for three days.

The 'Brew-Shed'
As mentioned I think I learned a lot from this brew day about how my new surroundings can be used better to make brew day a little easier. I will certainly construct a three tier gravity fed set-up in the shed before my next brew day and that should mean that there will be no need to be shuffling vessels around during the brew day. Also I think the aeration system will be a very worthwhile addition to my brewing equipment. Another change that I have made is to change the volume of beer I have will be brewing. Ordinarily as home brewers become more competent they tend to increase the amount of beer they make on a brew day, however I am doing the opposite. Fed up with bottling and all that that entails I have decided to brew 19-20 liter batches and then just keg the resulting beer. My system can cope with up to 27 liters and so if I could get my hands on a 1/2 corny (9.5 liter) I could increase once again and be getting one and a half kegs per batch. The only problem is that those 1/2 corny's are so hard to find :-(

Saturday, November 19, 2011

Finally, a brew day comes around.

It has been nearly six months since my last brew day. Moving house, starting a masters course and being hectic in work has seriously curbed my brewing exploits. Come hell or high-water tomorrow I will be brewing the following stout recipe which should be ready just in time for the festive holidays.

With this beer I am aiming for a smooth, creamy stout with a little twist of American hops at the end which I hope will balance out the dark malts and the bitterness of the Goldings hops.

Standard Stout II 

13-B Sweet Stout

Author: Mark

Date: 20/11/2011
BeerTools Pro Color Graphic

Size: 22.0 L

Efficiency: 75.0%

Attenuation: 72.1%

Original Gravity: 1.044 (1.044 - 1.060)

Terminal Gravity: 1.012 (1.012 - 1.024)

Color: 63.85 (59.1 - 78.8)

Alcohol: 4.19% (4.0% - 6.0%)

Bitterness: 22.5 (20.0 - 40.0)

Ingredients:

3000 g Maris Otter
475 g Barley Flaked
475 g Carapils®/Carafoam®
400 g Roasted Barley
245 g Chocolate 1060 EBC
36 g Goldings (5.0%) - added during boil, boiled 60 m
5 g Ahtanum (6.0%) - added during boil, boiled 1.0 m
5 g Amarillo (8.5%) - added during boil, boiled 1.0 m
5 g Columbus (15.0%) - added during boil, boiled 1.0 m
5 g Simcoe (13.0%) - added during boil, boiled 1.0 m
1.0 tsp Irish Moss - added during boil, boiled 15 m
1 ea Fermentis US-05 Safale US-05

Wednesday, November 2, 2011

It makes you proud to be Irish....

I promise I will get back to blogging about brewing soon, work and family just keep getting in the way at the moment :-)

In the meantime here is a good news story:


Irish Bartender wins
International Master Bartender Competition 2011

Dubliner, Fearghus McCormack, a third generation barman in the family run Merrion Inn, Dublin, has beaten stiff competition from across the globe to carry off the title of Pilsner Urquell International Master Bartender 2011. During a highly-competitive week-long final in the Czech Republic this month, he claimed the victory against an impressive group of finalists representing 15 countries.

Fearghus claimed the title in Prague earlier this month in a gala final he likened to ‘the Oscars of beer’. Commenting on his win Fearhgus said: “I can’t begin to express how excited and proud I am to win this title. The Merrion Inn always prides itself on quality, from the staff in the bar, to the food we serve, to the beers we stock. To have been internationally recognised & awarded by a brand of the pedigree of Pilsner Urquell is amazing. Pilsner Urquell is a real beer lovers’ favourite in The Merrion Inn..."


Thursday, September 22, 2011

Boston Beer...ahhhhhh

Just back from a trip to Boston and you got to love American bars. The choice of beer is truly staggering, you can choose your craft beer type bar and have a selection of 10-20 draft beers, some specials and then an endless bottle beer selection. Even if you are unfortunate to be dragged to a bar with no beer selection, they will probably still have Harpoon IPA on draft and a few Sam Adams selections.

Here is just some of the beers I got to try, all on draft unless it says otherwise:

Beer menu from The Other Side,
sorry for the poor quality pic.
Harpoon IPA : Whales Tale Pale Ale (bottle) : Clown Shoes Black IPA : Goose Island Honkers Ale : Boulder Mojo IPA : Stone Ruination IPA (Bottle) : Sierra Nevada Tumbler : Sam Adams Boston Lager : Pretty Things Jack D'Or Saison : Green Flash West Coast IPA : Gritty's Blackfly Stout

I also managed to stumble across a Sam Adams tasting session in my hotel bar and got to try bottles of their Oktoberfest, IPA and Irish Red.

The highlight of the trip from a bar point of view was finding Bukowski Tavern, it is on Dalton Street near the Boylston Street junction. From the outside it looks like a tiny dive bar, inside doesn't alter this perception much, however the staff are great, the music is good, and they have a selection of about 100 beers. Included in this are about 20 on draft and a cask offering specials. If you are in Boston make sure you check it out. Honorable mention also goes to The Other Side, it can be found just over the bridge at the junction between Newbury and Mass Avenue.

Monday, September 12, 2011

Pelle, comes to town

Humulus Lupus and some
members of Beoir.
Last week, Pelle Stridh from All About Beer was in Dublin with his beer club (Humulus Lupus) and we managed to meet up for a few beers and general beer discussion, joining us was Reuben and Richard from Beoir. I had suggested meeting up in the Bull & Castle and I do not think the guys were disappointed.

Over the course of four hours we managed to update them all on the current state of Irish Craft beer and quite a few Irish beers were sampled, including Metalman Pale Ale, Galway Hooker, O'Hara's IPA, Trouble Or, Howling Gale and also Black Rock Stout which was on Cask. Metalman Pale Ale seemed to be the stand out beer.


Pelle also managed to bring me over a few bottles of beer that I am looking forward to sampling. They both come from his local brewer, Eskilstuna Olkultur AB, and the brewer Lars Ekstron was there in person so that I could pick his brains. The beers are great as they are something that I would never be able to get in Ireland, one is a Double IPA and the other an Imperial Stout.

Well in a few days time I am off to Boston for a wedding and I hope to be sampling some great beers, I might also fit in a brewery tour or two if time allows.

I also also determined to get back brewing once I return from my trip. The brew day for Furious IPA seems only a distant memory (early June) and so I am keen to get back into it.

Tuesday, August 23, 2011

Lager Yeast, from Argentina!

Interesting article on the BBC News website today.

Scientists have identified a yeast that led to the discovery of lager. The researchers isolated the new species in the frozen forests of Patagonia in South America.

Saturday, August 20, 2011

Delays, delays.....but something to look forward to

It has been nearly a month since I posted my recipe for Standard Stout II, my lack of an update is not down to posting lethargy, but rather the fact that I have not brewed it. Why I hear you cry, well because in the last month we have decided to move house to a new town, said house has been found and we are moving next week.

The Brewing implications of the new house are significant!

Three things brewers look for in a house:

  1. An outside building 
  2. Outside access to electricity 
  3. Outside access to water 
Check, check and check. The new house has a decent size shed at the back of the garden and also has an outside tap and electrical socket. More than this my new town (Bray, County Wicklow, about 12 miles south of Dublin) has one of the original brew pubs in Ireland, The Porterhouse. It also has one of the best off-licenses for craft beer in Ireland, Holland's. The next couple of weeks are going to be a bit hectic, however I will report back soon on how the shed/brewery set up is going :-)

Monday, August 1, 2011

AG #9 - Furious IPA - First Pour

I have been very patient with my Furious IPA beer that I brewed at the beginning of June. Based on Surly Brewing's Furious (pic below). Two weeks fermenting and a further 4 weeks conditioning in the keg and the results of that patience have been very pleasing.


Pours a murky redish-brown colour with a creamy thick head. 

Hints of yeast off the nose initially and an ever so slight metallic taste can be gotten with the first taste, however as the beer warms up its true character emerges, a sweet malty base is nicely counterpointed by a strong hop aroma and flavour. The malty characteristics are a real success, Belgian Aromatic, Crystal and Roasted Barley blend together really well. The body is perfectly medium bodied, carbonation nice and low, very smooth mouthfeel.

The hop characteristics are strong but wonderfully smooth, no doubt this is down to the first wort hopping, a technique I will certainly be using again in my IPA's and APA's.

Defining characteristic is just how well all of the traits of this beer come together, sweet malty base, smooth hop bittering, nice high level of late hop flavour and aroma all brought together in a wonderfully smooth mouthfeel. Really happy with the way this turned out and will definitely be brewing this again.

Furious IPA:

Recipe
Brew Day
Fermentation & Conditioning

Saturday, July 23, 2011

AG #10 - Standard Stout II - Recipe

I have been contemplating my next brew for a few weeks now and I have decided to brew a beer that I made last year, but this year I am adding a little twist. Standard Stout was brewed last June and I was really happy with the results, beaming at the time that it was my best beer to date. For this years version I have decided to keep the grain bill the same, the bittering hop addition the same, the yeast has been changed based on my current inventory, however the significant change is that I have decided to introduce some American hop characteristics into the flavour and aroma. This will be achieved with a single late boil addition of Ahtanum, Simcoe, Columbus and Amarillo (5g each). This should give a light and subtle American hop  flavour and aroma.


Standard Stout II
Author: Mark

Size: 25.2 L
Efficiency: 74.34%
Attenuation: 72.1%
Calories: 142.33 kcal per 12.0 fl oz

Original Gravity: 1.043 (1.044 - 1.060)
Terminal Gravity: 1.012 (1.012 - 1.024)
Color: 62.15 (59.1 - 78.8)
Alcohol: 4.03% (4.0% - 6.0%)
Bitterness: 20.9 (20.0 - 40.0)

Ingredients:
3000 g Maris Otter
500 g Barley Flaked
500 g Carapils®/Carafoam®
432 g Roasted Barley
260.0 g Chocolate 1060 EBC
38.0 g Goldings (5.0%) - added during boil, boiled 60 min
5.0 g Ahtanum (6.0%) - added during boil, boiled 1.0 min
5.0 g Amarillo (8.5%) - added during boil, boiled 1.0 min
5.0 g Columbus (15.0%) - added during boil, boiled 1.0 min
5.0 g Simcoe (13.0%) - added during boil, boiled 1.0 min
1.0 tsp Irish Moss - added during boil, boiled 15 min
250 g DME
1.0 ea Fermentis US-05 Safale US-05

Mash @ 67c

Saturday, July 2, 2011

AG #9 - Furious IPA - Fermentation & Conditioning

The brew day for Furious IPA went very well and in this post I just wanted to give you an outline of my fermentation and conditioning schedule. Here is the timeline:

Brew day: 4th June
Primary Fermentation: 4th - 18th June

On the 18th I kegged one corny (19 litres) and 9 x 500 ml bottles.

Keg
Keg Conditioning (room temperature): 18th - 25th June
Keg Conditioning (fridge temperature): 25th - 30th June
Force Carbonation: 1st July - 8th July

Bottle 
Bottles will condition for 2-3 months at room temperature and then get a week of cold conditioning before being ready. With a session beer, bottle conditioning can be done in 2-3 weeks, however with this beer being 6% ABV it will benefit from the extra time in the bottle*.

* to be honest so would the keg, but who is going to be able to leave a keg condition for a couple of months, especially when my keggerator is empty!

So a pretty straightforward fermentation and conditioning process. Keg is typically one week conditioning, one week cold conditioning and one week force carbonating. For bottles a minimum of two weeks conditioning and then the longer you can hold off the better the beer will taste, most bottled beers will probably be at their peak between two and four months old. The above can be used as a rule of thumb but obviously adjust based on your set-up and the beer you are brewing.

Really looking forward to trying this beer next weekend. I'll report back on how it turned out.